Fenwal 05-384241-555 Ignition Control Board

120 VAC DIRECT SPARK IGNITION SYSTEM

This 120 VAC direct spark ignition system provides an efficient and reliable way of igniting your gas burner application. Its wide selection of features makes it the most versatile system available.

VERSATILE TO MEET YOUR SPECIFIC NEEDS
Depending on the model selected. flame sensing is achieved through the Ignition electrode or a separate local or remote flame sensing electrode. The system is available in single or multiple trial-for-ignition versions. Also selectable are a 15- or 30-second prepurge period and the length of the trial-for-ignition period. And the system module may be ordered with or without its fire retardant plastic case.

AGENCY CERTIFIED
The 05-38 system is certified by the American Gas Association as conforming to ANSI 221.20.11 is a]so certified by the Canadian Gas Association and is a UL recognized component.

COMPACT SIZE - EASY TO MOUNT
The eleetronic module (including enclosure) measures only 5.69 x 3.94 x 1.87in (144.4 x 99.9 x 47.5 mm} and weighs approximately 5.1 oz (145 g). It is not position sensitive and may be mounted vertically or horizontally using standard hardware. All connections are made with standard 1/4 inch quick connects.

INNOVATIVE DESIGN FOR SAFE AND EFFICIENT OPERATION
Flame sensing is achieved through the technique of using the high voltage spark electrode as the sensor or through a separate local or remote sensing probe. All models use the principle of flame rectification to monitor the burner flame. In addition. a patented self-monitoring misty circuit provides a type of protection not found in other ignition systems

SPEC1FCATIONS