|
|
|
|
|
|
|
|
|
|
|
LAARS 10364300 Return Header
|
LAARS S0063700 Flange Gasket
|
LAARS 10391302 Flange, Cast Iron, 500/750
|
|
|
|
|
|
|
|
|
|
|
|
|
LAARS 10338400 Pump Inlet Diffuser Baffle
|
Laars 10-330 Ignitor, Hot Surface, w/Gasket
|
LAARS 10483300 Pump Housing, Bronze
|
|
|
|
|
|
|
|
|
|
|
|
|
LAARS 10364201 Pump Adapter, Bronze
|
Teledyne Laars R20607600 Pump housing Kit, Mighty Therm 500-1825, Pennant 500-2000
|
Laars 10-332 Ignitor Gasket, CB/HWG
The igniter is a “glow bar” type silicon carbide unit. It is energized whenever there is a call for heat and the red "IGNITER" light on the boiler control is lit. After the igniter is switched off and the boiler continues to run, the igniter functions as a flame sensor for the boiler control. If the ignitor fails and must be replaced, always install a new igniter gasket with the replacement igniter. CAUTION: Ignitor gets hot.
|
|
|
|
|
|
|
|
|
|
|
|
|
LAARS 10364505 Inlet/Outlet Header (service bronze)
|
LAARS R10261501 Pump Housing, Glass-Lined Cast Iron
|
LAARS 10364200 Pump Adapter, Glass-Lined Cast Iron
|
|
|
|
|
|
|
|
|
|
|
|
|
TELEDYNE LAARS 10364301 Return Cover, Bronze, S0064200
|
LAARS 10338300 Inlet Water Barrier
|
LAARS RA0079000 Temperature & Pressure Gauge
|
|
|
|
|
|
|
|
|
|
|
|
|
Teledyne Laars 10391303 Flange, Cast Iron, 1000/2000
|
Laars 10-098 CABLE TIE, POLYPROPYLENE
|
Teledyne Laars 10338600 Cover, Peep Hole, Mighty Therm, Pennant, LoNox
|
|
|
|
|
|
|
|
|
|
|
10397501 Barrier, Water
|
10500900 COLLAR RING CONNECTOR
|
|