|
|
|
|
|
|
|
|
|
|
|
|
|
|
LAARS 10364300 Return Header
|
LAARS 10364500 Header Cover, Inlet/Outlet
|
LAARS S0063700 Flange Gasket
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LAARS 10338400 Pump Inlet Diffuser Baffle
|
LAARS 10525903 Gas Manifold Weldment (single inlet), 715
|
LAARS 10525904 Gas Manifold Weldment (single inlet), 850
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LAARS 10525906 Gas Manifold Weldment (single inlet), 1200
|
LAARS 10529501 Pilot Bracket/Burner Weldment (Johnson)
|
LAARS 10529502 Pilot Bracket/Burner Weldment (Honeywell)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LAARS 10525303 Burner Anti-Rotation Bracket (single pilot), 715
|
LAARS 10525304 Burner Anti-Rotation Bracket (single pilot), 850
|
LAARS 10525306 Burner Anti-Rotation Bracket (single pilot), 1200
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Teledyne Laars 10525707 Burner Tie Down Bracket, Left, (single pilot) 1200, (dual pilot) 1825
|
LAARS 10533700 Flue Collector, End Panel, Left
|
LAARS 10533800 Flue Collector, End Panel, Right
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Laars 10-330 Ignitor, Hot Surface, w/Gasket
|
Laars 10529200 Bracket, Pilot Mounting
|
Laars 10526303 Burner Tray Base Weldment, 715
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Laars 10526304 Burner Tray Base Weldment, 850
|
Laars 10526306 Burner Tray Base Wedlment, 1200
|
10524900 SIDE PANEL, BURNER TRAY
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10525200 SIDE PANEL, BURNER TRAY
|
10525503 BURNER TRAY BARRIER 715
|
10525504 BURNER TRAY BARRIER 850
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10525506 BURNER TRAY BARRIER 1200
|
LAARS 10418816 Pilot Sensor Lead Assembly, Standard Pilot, LP, Propane Gas, Spartk Ignition, LP & Natural Gas
|
LAARS 10418815 Pilot Sensor Lead Assembly, Standard Pilot, Natural Gas
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LAARS 10483300 Pump Housing, Bronze
|
LAARS 10364201 Pump Adapter, Bronze
|
Teledyne Laars R20607600 Pump housing Kit, Mighty Therm 500-1825, Pennant 500-2000
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Laars 10-332 Ignitor Gasket, CB/HWG
The igniter is a “glow bar” type silicon carbide unit. It is
energized whenever there is a call for heat and the red
"IGNITER" light on the boiler control is lit. After the igniter is
switched off and the boiler continues to run, the igniter functions
as a flame sensor for the boiler control.
If the ignitor fails and must be replaced, always install a new
igniter gasket with the replacement igniter.
CAUTION: Ignitor gets hot.
|
LAARS 10449519 Hi Tension Lead (orange/red wire from ignition control to pilot lead), 715-850
|
LAARS 10449520 Hi Tension Lead (orange/red wire from ignition control to pilot lead), 1010-1430
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LAARS 10534604 Baffle, HX (8 tube indoor, 14 req), 850
|
LAARS 10534606 Baffle, HX (8 tube indoor, 28 req), 1200
|
LAARS 10364505 Inlet/Outlet Header (service bronze)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LAARS 10535504 Flue Collector, Rear Panel (indoor), 850
|
LAARS 10535506 Flue Collector, Rear Panel (indoor), 1200
|
LAARS 10534404 Flue Collector, Front Support (indoor), 850
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LAARS 10534406 Flue Collector, Front Support (indoor), 1200
|
Teledyne Laars 10533904 Sweep Sheet, Flue Collector (indoor), 850
|
Teledyne Laars 10533906 Sweep Sheet, Flue Collector (indoor), 1200
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10101002 CVR,CAPILLARY TUBE,10.25"
|
10101004 COVER,CAPILLARY TUBE,17"
|
10358412 FLUE COLLAR 16" DIA.
|
|
|
